#!/bin/sh

#-------------------------------------------------------------

  MDL="${HOME}/hysplit4"
  OUT="${MDL}/working"
  MET="${HOME}/Tutorial/captex"
  cd $OUT

  if [ ! -f ASCDATA.CFG ]; then
     echo "-90.0  -180.0"     >ASCDATA.CFG
     echo "1.0     1.0"      >>ASCDATA.CFG
     echo "180     360"      >>ASCDATA.CFG
     echo "2"                >>ASCDATA.CFG
     echo "0.2"              >>ASCDATA.CFG
     echo "'$MDL/bdyfiles/'" >>ASCDATA.CFG
  fi
  echo "### $0 ###"

#--------------------------------------------------------------

  syr=83
  smo=09
  sda=25
  shr=17 
     
  olat=39.90
  olon=-84.22
  lvl1=200.0
        
  run=52
  ztop=10000.0
  data="captex2_narr.bin"

#----------------------------------------------------------

  echo "$syr $smo $sda $shr    " >CONTROL
  echo "1                      ">>CONTROL
  echo "$olat $olon $lvl1      ">>CONTROL
  echo "$run                   ">>CONTROL
  echo "0                      ">>CONTROL
  echo "$ztop                  ">>CONTROL
  echo "1                      ">>CONTROL
  echo "$MET/                  ">>CONTROL
  echo "$data                  ">>CONTROL
  echo "1                      ">>CONTROL
  echo "PMCH                   ">>CONTROL
  echo "67000.0                ">>CONTROL
  echo "3.0                    ">>CONTROL
  echo "00 00 00 00 00         ">>CONTROL
  echo "1                      ">>CONTROL
  echo "42.0 -78.0             ">>CONTROL
  echo "0.25 0.25              ">>CONTROL
  echo "15.0 25.0              ">>CONTROL
  echo "$OUT/                  ">>CONTROL
  echo "ensemble               ">>CONTROL
  echo "1                      ">>CONTROL
  echo "100                    ">>CONTROL
  echo "83 09 26 06 00         ">>CONTROL
  echo "83 09 28 15 00         ">>CONTROL
  echo "00 03 00               ">>CONTROL
  echo "1                      ">>CONTROL
  echo "0.0 0.0 0.0            ">>CONTROL
  echo "0.0 0.0 0.0 0.0 0.0    ">>CONTROL
  echo "0.0 0.0 0.0            ">>CONTROL
  echo "0.0                    ">>CONTROL
  echo "0.0                    ">>CONTROL

#----------------------------------------------------------

  echo "&SETUP              "  >SETUP.CFG
  echo "numpar=10000,       " >>SETUP.CFG
  echo "maxpar=100000,      " >>SETUP.CFG
  echo "/                   " >>SETUP.CFG

  rm -f ensemble.???

  for mem in  1  2  3  4  5  6  7  8  9 10 11 12 13 14 \
             15 16 17 18 19 20 21 22 23 24 25 26 27; do
      ${MDL}/exec/hycs_ens $mem 
  done

#----------------------------------------------------------

${MDL}/exec/conprob -bensemble -t1 -p1 -z1

echo "'TITLE&','### $0 ###&'"            >LABELS.CFG
echo "'UNITS&',' g&'"                   >>LABELS.CFG
echo "'MAPID&','Air Concentration&'"    >>LABELS.CFG

${MDL}/exec/concplot -m0 -k1 -z80 -j${MDL}/graphics/arlmap -iprob50
gs concplot.ps
echo "Enter to continue ..."; read x

${MDL}/exec/boxplots -x-78.80 -y42.25
gs boxplots.ps
echo "Enter to continue ..."; read x

${MDL}/exec/ensplots -bensemble -x-78.80 -y42.25
gs ensplots.ps