#!/bin/sh

  MDL="${HOME}/hysplit4"
  OUT="${MDL}/working"
  MET="${HOME}/Tutorial/captex"
  cd $OUT

  if [ ! -f ASCDATA.CFG ]; then
     echo "-90.0  -180.0"     >ASCDATA.CFG
     echo "1.0     1.0"      >>ASCDATA.CFG
     echo "180     360"      >>ASCDATA.CFG
     echo "2"                >>ASCDATA.CFG
     echo "0.2"              >>ASCDATA.CFG
     echo "'$MDL/bdyfiles/'" >>ASCDATA.CFG
  fi
  echo "### $0 ###"

#--------------------------------------------------------------

  syr=83
  smo=09
  sda=25
  shr=17
     
  olat=39.90
  olon=-84.22
  olvl1=10.0
  olvl2=750.0
  olvl3=1500.0
        
  run=68
  ztop=10000.0
  data="captex2_narr.bin"

#----------------------------------------------------------

  echo "$syr $smo $sda $shr    " >CONTROL
  echo "3                      ">>CONTROL
  echo "$olat $olon $olvl1     ">>CONTROL
  echo "$olat $olon $olvl2     ">>CONTROL
  echo "$olat $olon $olvl3     ">>CONTROL
  echo "$run                   ">>CONTROL
  echo "0                      ">>CONTROL
  echo "$ztop                  ">>CONTROL
  echo "1                      ">>CONTROL
  echo "$MET/                  ">>CONTROL
  echo "$data                  ">>CONTROL
  echo "$OUT/                  ">>CONTROL
  echo "tdump                  ">>CONTROL

#----------------------------------------------------------

  rm -f tdump
  rm -f SETUP.CFG
  ${MDL}/exec/hyts_std    
  ${MDL}/exec/trajplot -itdump -z80 -j${MDL}/graphics/arlmap -v0
  gs trajplot.ps
  echo "Enter to continue ..."; read x

#-----------------------------------------------------------

  olvl1=0.5

  echo "$syr $smo $sda $shr    " >CONTROL
  echo "1                      ">>CONTROL
  echo "$olat $olon $olvl1     ">>CONTROL
  echo "$run                   ">>CONTROL
  echo "0                      ">>CONTROL
  echo "$ztop                  ">>CONTROL
  echo "1                      ">>CONTROL
  echo "$MET/                  ">>CONTROL
  echo "$data                  ">>CONTROL
  echo "$OUT/                  ">>CONTROL
  echo "tdump                  ">>CONTROL

  echo "&SETUP               " >SETUP.CFG
  echo "kmsl=2,              ">>SETUP.CFG
  echo "/                    ">>SETUP.CFG

  rm -f tdump

  ${MDL}/exec/hyts_std    

  echo "'TITLE&','### $0 ###&'"  >LABELS.CFG
  ${MDL}/exec/trajplot -itdump -z80 -j${MDL}/graphics/arlmap -v0
  gs trajplot.ps